差热法测定钢样表面氧与体内氧的方法研究

本文利用美国LECO公司生产的TC-436氧氮仪,研究了光谱纯Fe2O3,Al2O3和在大量脱氧铁存在下Al2O3的氧释放曲线,得到了它们的分解功率、分解电流和分解计算温度.成功地分离了钢样的表面氧和体内氧,并对钢样不同表面氧的组成做了初步研究.     

非化学计量LaNi5型储氢合金的性能

采用富La混合稀土与Ni、Co、Mg等元素组合，获得了一种非化学计量LaNi5型储氢合金、用金相、XRD和SEM-EDX等方法分析了该合金的组织结构，研究了合金的气相储氢特性以及电化学性能，结果表明：在1.6MPa氢压和温度29℃下，该合金的储氢量达到1.58%（质量分数），该合金的放电容量为380mAh/g。经300次循环后容量保持率为55%，该合金的基体是CaCu5型结构的LaNi5相，但有第二相（LaMg)Ni3析出，这种第二相的形成是导致该合金大容量的关键。     

The effect of additives on the thermal stability of poly(vinyl chloride)

The effect of a range of organic additives on the thermal stability of poly(vinyl chloride), both with and without a chloroparaffin extender, was studied using a number of experimental techniques. Of the additives used the best overall balance was provided by pentaerythritol, which increased stability when the extender was present and had no effect when it was absent. The congo red test emerged as the most suitable technique, being consistent and inexpensive and able to screen several additives simultaneously. Isothermal differential thermal analysis correlated with the congo red test but required more expensive equipment, was time-consuming and demanded good mixing of the poly(vinyl chloride) compound to give reproducible results. Thermogravimetry was not sufficiently sensitive and the heat stability test was the least useful of all.     

紧凑型FLC光纤PDL模块

描述了紧凑型FLC（铁电液晶）光纤PDL（光子延迟线）模块的结构和运转特性；分析了插入损失；提出多信道运转时依赖于波长的设计方案。     

Optimal Operation of Reservoir Systems using Simulated Annealing

A stochastic search technique, simulated annealing (SA), is used to optimize the operation of multiple reservoirs. Seminal application of annealing technique in general to multi-period, multiple-reservoir systems, along with problem representation and selection of different parameter values used in the annealing algorithm for specific cases is discussed. The search technique is improved with the help of heuristic rules, problem-specific information and concepts from the field of evolutionary algorithms. The technique is tested for application to a benchmark problem of four-reservoir system previously solved using a linear programming formulation and its ability to replicate the global optimum solution is examined. The technique is also applied to a system of four hydropower generating reservoirs in Manitoba, Canada, to derive optimal operating rules. A limited version of this problem is solved using a mixed integer nonlinear programming and results are compared with those obtained using SA. A better objective function value is obtained using simulated annealing than the value from a mixed integer non-linear programming model developed for the same problem. Results obtained from these applications suggest that simulated annealing can be used for obtaining near-optimal solutions for multi-period reservoir operation problems that are computationally intractable.     

Photopolymerization of N,N‐dimethylaminoethylmethacrylate studied by photocalorimetry

Photopolymerization of dimethylaminoethylmethacrylate (DMAEMA) is studied in bulk and in solutions in the presence of different photoinitiators using differential photocalorimetry (DPC). The rate of DMAEMA photopolymerization is slow compared to that of alkylmethacrylates. Bimodal DPC curves of DMAEMA photopolymerization in bulk are obtained. The type I photoinitiators (IRGACURE® 651 and IRGACURE® 1700), which produce free radicals by homolytic fragmentation of photoexcited molecules, are more effective in promoting photopolymerization of DMAEMA. The type II photoinitiators (benzophenone and IRGACURE® 500), which initiate DMAEMA photopolymerization through an H‐abstraction mechanism involving an amino group from the monomer (polymer), are less efficient and favor the formation of partly crosslinked products. The effects of the photoinitiator concentration, temperature, and solvent on the kinetic data are evaluated and discussed. A scheme of photopolymerization of DMAEMA, including the formation of intermediate DMAEMA based macromonomers, is proposed. The main point of the suggested scheme is a high chain transfer to the DMAEMA monomer. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 579–588, 2002     

Ionomer composites based on sepiolite/hydrogenated poly(styrene butadiene) block copolymer systems

Ionomeric composites based on sepiolite and hydrogenated poly(styrene butadiene) block copolymer were obtained and characterized from a microstructural and electrical point of view. Before blending, because of the high silanol group concentration in the sepiolite, the latter could be organophilized with suitable coupling agents. The resulting materials were easily processed into thin films or membranes 0.2–0.4 mm thick, their conductivity in some cases approaching 10^?1 S/cm. Their suitability for film formation and good electrical properties indicate potential applications as electrolytes in polymer fuel cells. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3512–3519, 2002     

毫米波谐波振荡器的多模Volterra级数分析

本文基于Ｖｏｌｔｅｒｒａ级数和非线性转移函数理论，提出了一种分析毫米波谐波振荡器的新方法一多模Ｖｏｌｔｅｒｒａ级数法，并给出了描述其非线性特性的决定方程，通过求解一组非线性代数方程，便可计算出谐波振荡器的振荡频和幅度。文中给出了分析实例并与谐波平衡法等进行了比较，结果表明：这种方法具有理论严密、准确性高，适用范围广等特点特别是利用一次决定方程的结果作为其它非线性数值分析方法的初始估值，可大大地节约     

用分数延迟改进基音预测的CELP编码方案

在ＣＥＬＰ编码器中，通常用延迟为抽样间隔整数倍的长项预测器表征浊音语音的准周期性，然而在低比特率，这种限制降低了编码器的性能。本文在介绍了ＣＥＬＰ编码器原理及激励码本构成后，重点研究了一种新型的基音预测方法；分数延迟基音预测，计算机模拟结果表明，这种方法能对浊音进行更准确的表达，尤其对女性讲话者明显改善了语音质量。     

方波信号在音频技术中的应用

本文重点介绍了方波依赖在音频测量，设备的维护检测及录音均衡自动调节等音频技术中的应用，并通过对方波信号的频谱特性和方波信号通过线性系统的频域特性的分析，简要说明了方波信号在应用电路中的基本工作原理。